DLP Projectors: LUMIS Line: Lumis HC 3D-D

  • 2x Compact 3-chip Full HD (1080p) DLP®- based projectors
  • 3D active and passive technology
  • Triple Flash Technology
  • InstaPort technology
  • SIM2 Motorized Sliding Filter (SFS)
  • Contrast ratio >25.000:1 with DynamicBlack (2D mode)
  • Brightness up to 6000 Ansi Lumens (in 2D mode)
  • Stacking system

The Grand Cinema™ LUMIS HC 3D-D is a high-end compact 3-chip DLP® home theater 3D dual unit projector system with customizable color filter options for specialist applications. Designed for 3D cinema, the projector may be used in either active or passive 3D mode. The system is equipped with a Mounting Assembly with micro-metric adjustment for precise alignment of the two projectors.

SIM2’s LUMIS HC 3D-D projection system is designed to reproduce 3D images with the same depth and vivid intensity as those experienced at the cinema. Its dual projection format is the result of thorough research into the effects of 3D filtering on projector optical systems. The findings were that such filtering causes light output losses of approximately 60%, when compared to conventional 2D projection.
Clearly a dual-projector system not only allows for accurate calibration of each of the left/right channels, but also enables a higher light output to be realized.
This is important for large screen installations because the light output required to illuminate the screen to the industry standard reference level is much greater than that of a small screen.

The LUMIS HC 3D-D is a revolutionary 3-chip Full HD system based on two LUMIS 3D-S HC projectors. It sports all of the LUMIS 3D-S HC features including
Triple Flash technology, PureMovie, PureMotion, and PureMotion 3D user modes.
The LUMIS HC 3D-D system consists of:
• Two customized LUMIS 3D-S HC projectors with SIM2’s motorized Sliding Filter System inside the optical engine allowing dual projection mode (2D or 3D). The use of this automatic double filter (SFS) allows the use of two different color gamuts on each product.
• Filters (1) included are INFITEC 3D and HDTV (Rec.709). Other filters can be ordered to create a truly customized product (2).
• Projector mounting bracket assembly.
• InstaPort™ Technology.
• SIM2 VISUS active 3D glasses and INFITEC Premium 3D glasses.
• Live Colors Calibration 2.0 Software.

The LUMIS HC 3D-D dual-projector system not only allows for accurate calibration of each of the left/right channels, but also enables a higher light output to be realized. The LUMIS HC 3D-D, when working in 2D dual mode, is able to output up to 6000 ANSI Lumens, with a Full On/Full Off contrast ratio over 25,000:1.

Available in SIM2’s classic high gloss Gun Metal finish.

Technology: Wavelength Multiplex (INFITEC®) 3D systems

The system uses two different INFITEC® filters placed inside two different projectors’ engines between the light source and the DMD, and the same filters placed on the glasses, thus classified as passive.
The filters are very complex with 20 to 30 layers of tint and coatings. They basically act as two slightly different comb filters thus splitting the RGB lamp spectrum and
generating two close sets of primaries, one for the left and one for the right channel.
Each projector displays the corresponding image and the two sets are offset one from the other similar to the way they are in other passive glasses systems. Then, the
images are recombined by the brain through the INFITEC® glasses creating the 3D stereoscopic effect.
Infitec technology has a very low ghosting level.

INFITEC® technology in detail:

Two Infitec optical filters (continue and hatched lines here on the right image) separate the lamp’s optical spectrum in two parts: one for the Left eye and the other for the Right eye.
Each filter is inserted in the optical path of one of the two projectors.The stereoscopic image is obtained by channeling the image for the left eye in a projector and that for the right eye in the other.
The primary colors of the two channels are thus separated by filters and recombined by the viewer using the glasses, also provided with Infitec filters.

C3X LUMIS LIGHT ENGINE

DLP® Type 3x 0,95 DC4 DMDs
Resolution Full-HD 1920x1080 pixels
Special features 3D Active and passive technology; InstaPort Technology; TripleFlash technology (144 Hz); SIM2's PureAction 2D/3D & PureMovie 2D technologies
SIM2 Motorized Sliding Filter (SFS) Infitec 3D and standard HDTV (Rec. 709) color reproduction filters
SIM2 DynamicBlack Technology enchanced solution
Contrast ratio >25.000:1 with DynamicBlack technology (in 2D mode)
System Brightness up to 6.000 ANSI Lumens (in 2D mode)
Lamps power consumption and lifespan 280W >2.000 hrs.* average life time, >3000 hrs ECO MODE

INSTALLATION

Throw ratio 1,82-2,48:1 (standard lens - type T2) or 1,37-1,66:1 (type T1 – on request) or 2,6-3,9:1 (type T3 - on request)
Lens shift Vertical up to +50% down -10% max from screen center (based on image height)
Digital Keystone +/- 18 degree
Picture size 50-300 inches diagonal
Aspect ratio 4:3, 16:9 Anamorphic, LetterBox, panoramic, pixel to pixel + 3 custom-user adjustments

ELECTRONICS

Horiz. & Vertical scan freq. 15-80 kHz/48-144 Hz
Color System PAL (B,G,H,I,M,N,60); SECAM; NTSC 3.58; NTSC 4.43
PC graphic standards VGA, SVGA, XGA,SXGA, UXGA, WUXGA
SDTV 480i/p, 576i/p;
HDTV 720p 50/60, 1080i 50/60, 1080p 24/50/60 + 576p

C3X LUMIS INPUTS/OUTPUTS

Digital 2 x HDMI™-HDCP (with 1.4 DeepColor)
Analog 1 x Composite Video (RCA)
1 x Component - Analog YPbPr/RGBs (RCA x 4)
1 x Graphic RGBHV (VGA-UXGA) (D-Sub 15 pin)
Control 1 x USB (B type)
1 x RS232 (D-Sub 9 pin)
MIscellaneous 1 x 12V 100mA jack
1 x 12V 100mA jack for 4:3/16:9 aspect ratio
1 x 12V 100mA jack for anamorphic lens driving
3D Sync Out

GENERAL SPECIFICATIONS

Software control upgradable via RS232 serial interface and USB
Mains voltage range 100-240Vac ±10% (48/62Hz)
Power consumption approx. 800W
Projector's Weight 2x 11 Kg. ( 44 lbs)
Single unit projector dimensions (WxHxD) 459 x 210 x 455 (18.1" x 8.3" x 17.9")
Dimensions (WxHxD) stacking system approx. 810 x 630 x 830 mm (32" x 25" x 33")

ACCESSORIES(**)

Supplied SIM2 Visus Active 3D glasses (4 pcs.)
Infitec Premium Passive 3D glasses (2pcs.)
Live Color Calibration Software 2.0
Installation and User Manual;
AC power cords (2m - 6,6 ft);
Backlit Remote control and batteries;
Stack System
Optional SIM2 Visus Active 3D glasses (additional pairs)
Infitec Premium Passive 3D glasses (additional pairs)
Additional Sliding Filters
(*) Lamp life: the hours quoted have been measured in a lab under ideal test conditions. Lamp life varies depending on usage conditions and the surrounding environment. This is an average value that cannot be guaranteed and is not protected by warranty.
(**)the delay time may vary depending on the required accessory. Please, verify the availability with SIM2 representative
UNIT: ASPECT RATIO:
in cm 16:9
DIAGONAL

WIDTH

HEIGHT

DISTANCE

Catalogs

Description: SIM2 Grand Cinema Line Catalog
SIM2 Grand Cinema Line Catalog
Grand Cinema Line: the real cinema at home. No compromises. No competition.
MODELS: LUMIS 3D-S, LUMIS 3D-S UNO, LUMIS 3D-S HC, LUMIS HC 3D-D
(5304Kb) SIM2_Grand Cinema LUMIS.pdf 06.03.2015
Description: LUMIS HC 3D-D -  Technical Specs sheet - UK
LUMIS HC 3D-D - Technical Specs sheet - UK
(869Kb) SIM2_LUMIS_HC3DD_EN_oct12.pdf 02.18.2013

Software & Technical material

Description: Live Colors Calibration software 3.8
Live Colors Calibration software 3.8
The advanced Live Colors Calibration software, enables complete adjustment of the primary, secondary and white point color coordinates of the projector.
(22859Kb) LCC2_ver3.8_Feb24th2016.zip 06.06.2016