DLP Displays: Grand Cinema RTX: RTX 45

RTX 45
  • DLP™ technology-based (HD2 chip) large screen display for home theatre
  • 45" screen diagonal
  • External DigiOptic™ Image Processor box
  • Optic fibre cable link up to 500 metres
  • High Speed laser
  • Contrast ratio 1800:1
  • Custom-made lens and design
  • DCDi™ by Faroudja (built-in)
  • DVI Input
  • Elegant cabinet design

SIM2 takes Home Cinema to a higher level
After the success of the HT300 projector series, SIM2 realized the need to apply the projectors’ technology to a display device that can be utilized in a variety of rooms while fulfilling the need of the home theatre enthusiast.

The market is demanding a self-contained product which features innovative exterior design and installation flexibility while maintaining the stunning picture the HT300 series produces. With this concept in mind, SIM2 Multimedia has designed the Grand Cinema RTX line: a revolutionary concept where image quality, technology and design are combined.

The Grand Cinema RTX’s elegant cabinet (available in different colours) is immediately recognisable: A fancy crystal front, a reduced depth of 14,5” (approx. 37 cm), sophisticated shapes, and prestigious material make it a true masterpiece by the award winning designer - Giorgio Revoldini. But within the cabinet is where the heart of the system lies. Through your eyes and emotion you will be left breathless every time you watch your Grand Cinema RTX.

It is with the Grand Cinema RTX that SIM2’s cutting-edge design and technology shines: technology that, once again, raises the standards of home cinema.

The Grand Cinema RTX line, available in two models (45” and 55” diagonal screens – 16:9 image format), is based on the HD-2 Digital Micromirror Device by Texas Instruments, boasting a resolution of 1280 x 720 pixels for true high definition capability. The RTX line features three custom-made components (SIM2 patent rights): first, a high resolution projection lens for reduced cabinet depth; second, a specific Fresnel lens to match the DMD chip; and, third, an improved and sealed light engine for super-high contrast (1800:1) and black level.

A single optic fibre cable (3,5 mm - 0,14” diameter) coupled with a system of three laser beams allows you to connect your Grand Cinema RTX to the wide choice of inputs on the DigiOptic™ Image Processor without compromising the quality of the signal. In fact, you may place your VCR, DVD or Set Top Box up to 500 m (1600 ft) away.

The Grand Cinema RTX features a built-in deinterlacer and video enhancement (DCDi™) powered by Faroudja applies motion adaptive deinterlacing that prevents the introduction of motion artifacts and jagged edges from video signals that originated from video cameras.

As with all products in the Grand Cinema line, consumers can keep the RTX as up-to-date as possible. The RS232 port in the RTX’s DigiOptic™ Image Processor affords enthusiasts the ability to easily download the latest control software.

Light engine

DLP™ Type Proprietary optical engine (sealed housing) based on 1 DMD (HD2 chip)
Resolution WXGA (1280x720 pixels)
Lamp power consumption & average life time 120 W UHP; 6000 hours (*)

Electronics

Horizontal & Vertical Scan Frequency 15KHz/48/Hz-100Hz (max horizontal freq. Corresponding to UXGA, 60 Hz)
Video standards Pal B, G, H, I, M, N, 60, SECAM, NTSC 3.58 & 4.43 automatically selected. HDTV ATSC standards (480p, 1080i, 720p).
Graphic Standards VGA, XGA, SXGA, UXGA
Aspect ratio selectable via remote control 16:9, 4:3, Anamorphic, Letter Box, Panoramic, Pixel toPixel + 3 user adjustements
Deinterlacer & processing On-board DCDi™ by Faroudja
Contrast Ratio 1800:1 Full On/Off
Colours temperatures 3 preset colour temperatures selectable by remote control
Special Video Adjustment Luma-Choma Delay Adjustment by OSD; Tint Adjustment on NTSC; Electronic Zooming and Panning of the Picture

Inputs/Outputs

Remote DigiOptic™ Image Processor Featuring a wide choice of inputs-linked to the RTX via fiber optics (ø 3.5 mm-0.14").
Cable available up to 500 m (1600 ft)

DigiOptic™ Image Processor

Analog 2 Composite video via RCA connectors
2 S-VHS via mini Din 4 pin connectors
2 RGB via DB 15 HD connectors
3 RGBH/V/YcrCbH/V configurable
1 RGBH/V/YcrCbH/V configurable
Digital 1 DVI on DVI-D connector
Miscellaneous 1 RS232 via DB 9 pins connector
3 fiber optic links via RJ-45 type LC connectors
1 x jack 12V power output, active when the product is ON

General Specifications

Control Control software can be updated via RS232 serial interface
Power Consumption 170 W max; Mains voltage range: 100-240 Vac, -/-10%(48/62Hz)
Weight 60 Kg. (132,3 Lbs)
Cabinet dimensions (WxHxD) 1227,8x1108x368,6 (48,34”x43,62”x14,51”)
Packaging dimensions (WxHxD) 1400x1300x600 mm (55,12”x51,18”x23.62")

Certifications

Safety In compliance with EN 60950;
Emission In compliance with EN 55022 class B
Immunity In compliance with EN 61000 - 4

Accessories

Supplied DigiOptic™ Image Processor & cable (20m – 49,2 ft)
AC power cords EU, UK and USA); length 2 m (6,5 ft)
User standard remote control with batteries
Installation and user manual
Optional The DigiOptic™ Image Processor cable is available in different lengths up to 500 m (1600 ft)
(in section of 10 m-33 ft)
Software for PC remote control

Colour Selection

Standard colour Silver Gray
Optional colours Silver Red, Black Shadow

(*) Lamp life: the hours quoted have been calculated in a lab under strict test conditions. Lamp life varies depending on usage conditions and the surrounding environment. The calculated lamp life cannot be guaranteed and is not protected by warranty

Due to constant product development, specifications and design might be subject to change without notice.
UNIT: ASPECT RATIO:
in cm 16:9
DIAGONAL

WIDTH

HEIGHT

DISTANCE

User Manuals

Description: RTX 45 User Manual
RTX 45 User Manual
(711Kb) down-RTX_UK.pdf 08.25.2009

Reviews

Description: RTX 45 Review
RTX 45 Review
(688Kb) 53-rws.pdf 08.24.2009