DLP Projectors: LUMIS Line: Superlumis D

  • 2x Compact 3-chip Full HD (1080p) DLP®- based projectors
  • 3D active and passive technology
  • Infitec Technology passive 3D stereo visualization
  • Active 3D stereo visualization featuring SIM2’s 3D Triple Flash Technology
  • SIM2 Motorized Sliding Filter (SFS)
  • Contrast ratio >25.000:1 with DynamicBlack (2D mode)
  • Brightness up to 10,000 Ansi Lumens (in 2D mode)
  • Projector mounting bracket assembly with micro-metric adjustment capability

The Grand Cinema™ SUPERLUMIS D is a high-end compact 3-chip DLP® home theater 3D dual unit projector system with customizable color filter options for specialist applications. Designed for 3D cinema, the projector may be used in either active or passive 3D mode. The system is equipped with a Mounting Assembly with micro-metric adjustment for precise alignment of the two projectors.

SIM2’s Grand Cinema™ SUPERLUMIS D projection system is designed to reproduce 3D images with the same depth and vivid intensity as those experienced at the cinema. Its dual-projection format is the result of thorough research into the effects of 3D filtering on projector optical systems. The findings were that such filtering causes light output losses of approximately 60%, when compared to conventional 2D projection. Clearly a dual-projector system not only allows for accurate calibration of each of the left/right channels, but also enables a higher light output to be realized. This is important for large screen installations because the light output required to illuminate the screen to the industry standard reference level is much greater than that of a small screen.

The SUPERLUMIS D system consists of:
• Two customized Grand Cinema™ SUPERLUMIS HC projectors with SIM2’s motorized Sliding Filter System (SFS) inside the optical engine allowing dual projection mode (2D or 3D). The use of the automatic SFS allows the use of 2 different color gamuts on each product.
• Filters(1) included are INFITEC 3D and Rec.709. Custom filters are available upon request2.
• Projector mounting bracket assembly.
• Active or passive 3D and InstaPort™ Technologies.
• SIM2 VISUS active 3D + INFITEC Premium 3D glasses.

The SUPERLUMIS D, when working in 2D dual mode, is able to output up to 10,000 ANSI Lumens (depending on lens type), with a Full On/Full Off contrast ratio over 25,000:1.

Available in SIM2’s classic high gloss Gun Metal finish or in White or Black color case options.

(1) This product is a custom-built-to-order and will require a 30 day lead time.
(2) 60 day lead time after customer request and defined color gamut requirement description.

Technology: Wavelength Multiplex (INFITEC®) 3D systems

The system uses two different INFITEC® filters placed inside two different projectors’ engines between the light source and the DMD, and the same filters placed on the glasses, thus classified as passive.
The filters are very complex with 20 to 30 layers of tint and coatings. They basically act as two slightly different comb filters thus splitting the RGB lamp spectrum and generating two close sets of primaries, one for the left and one for the right channel.
Each projector displays the corresponding image and the two sets are offset one from the other similar to the way they are in other passive glasses systems. Then, the images are recombined by the brain through the INFITEC® glasses creating the 3D stereoscopic effect. INFITEC technology has a very low ghosting level.

INFITEC® technology in detail:

Two INFITEC optical filters (continue and hatched lines here on the right image) separate the lamp’s optical spectrum in two parts: one for the Left eye and the other for the Right eye.
Each filter is inserted in the optical path of one of the two projectors.The stereoscopic image is obtained by channeling the image for the left eye in a projector and that for the right eye in the other.
The primary colors of the two channels are thus separated by filters and recombined by the viewer using the glasses, also provided with Infitec filters.


DLP® Type 3x 0,95 DC4 DMDs
Resolution Full-HD 1920x1080 pixels
Special features SIM2 Perfect Fit Feature;
3D Active and passive technology;
InstaPort Technology;
TripleFlash technology (144 Hz);
SIM2's PureAction 2D/3D & PureMovie 2D Technologies
SIM2 Motorized Sliding Filter (SFS) Infitec 3D and standard HDTV (Rec. 709) color reproduction filters
SIM2 DynamicBlack Technology enchanced solution
Contrast ratio >25.000:1 with DynamicBlack technology (in 2D mode)
System Brightness(1) up to 10.000 ANSI Lumens (in 2D mode)
Lamps power consumption and lifespan(2) 350W >2.000 hrs. average life time, >3000 hrs ECO MODE


Lens type: High Brightness (HB) or Extended Contrast (EC)
Throw ratio 1,82-2,48:1 (standard lens - type T2) or 1,37-1,66:1 (type T1 – on request) or 2,6-3,9:1 (type T3 - on request)
Perfect Fit zoom, focus, and lens shift memory feature
Lens shift Vertical up to +50% down -10% max from screen center (based on image height)
Digital Keystone +/- 18 degree
Picture size (inches diagonal) 50-300
Aspect ratio 4:3, 16:9 Anamorphic, LetterBox, panoramic, pixel to pixel + 3 custom-user adjustments


Horiz. & Vertical scan freq. 15-80 kHz/48-144 Hz
Color System PAL (B,G,H,I,M,N,60); SECAM; NTSC 3.58; NTSC 4.43
PC graphic standards VGA, SVGA, XGA,SXGA, UXGA, WUXGA
SDTV 480i/p, 576i/p
HDTV 720p 50/60, 1080i 50/60, 1080p 24/50/60 + 576p


Digital 2 x HDMI™-HDCP (with 1.4 DeepColor)
Analog 1 x Composite Video (RCA);
1 x Component - Analog YPbPr/RGBs (RCA x 4);
1 x Graphic RGBHV (VGA-UXGA) (D-Sub 15 pin)
Control 1 x USB (B type);
1 x RS232 (D-Sub 9 pin)
Miscellaneous 1 x 12V 100mA jack;
1 x 12V 100mA jack for 4:3/16:9 aspect ratio;
1 x 12V 100mA jack for anamorphic lens driving;
3D Sync Out


Software control upgradable via RS232 serial interface and USB
Mains voltage range 100-240Vac ±10% (48/62Hz)
Power consumption approx. 800W
Projector's Weight 2x 11 Kg. ( 44 lbs)
Single unit projector dimensions (WxHxD) 459 x 210 x 455 (18.1" x 8.3" x 17.9")
Dimensions (WxHxD) stacking system approx. 810 x 630 x 830 mm (32" x 25" x 33")


Supplied SIM2 Visus Active 3D glasses (4 pcs.);
Infitec Premium Passive 3D glasses (2pcs.);
Live Color Calibration Software 2.0;
Installation and User Manual;
AC power cords (2m - 6,6 ft);
Backlit Remote control and batteries;
Stack System
Optional SIM2 Visus Active 3D glasses (additional pairs);
Infitec Premium Passive 3D glasses (additional pairs);
Additional Sliding Filters (3)
(1) ANSI Lumen Specification: This is the typical projector brightness specification found in most sales literature. This measurement allows for direct comparison with other manufacturer’s projectors. Measurements are taken in a totally dark test room with T3 type lens (wide angle zoom settings), brand new lamp at full power, lamp’s native white color temperature, internal test pattern (full white) and in compliance with ANSI IT7.228-1997 specification.
(2) Lamp life: the hours quoted have been measured in a lab under ideal test conditions. Lamp life varies depending on usage conditions and the surrounding environment. This is an average value that cannot be guaranteed and is not protected by warranty.
(3) 60 day lead time after customer request and defined color gamut requirement description.
This product is a custom-built-to-order and will require a 30 day lead time.
Due to constant product development, specifications are subject to change without notice.
in cm 16:9




RS232-IR Codes

Description: Superlumis - IR Codes - vers1.4
Superlumis - IR Codes - vers1.4
SIM2 IR Control signal protocol
Description: Superlumis - RS232 Control - vers1.0
Superlumis - RS232 Control - vers1.0
This document describes how to interface the SUPERLUMIS projector with a Home Theatre control system (or a PC) over a direct serial connection.

User Manuals

Description: SIM2 Perfect Fit - EN
SIM2 Perfect Fit - EN
SIM2's Perfect Fit enables the projector to display 2.35/2.40:1 video material on a 2.35/2.40:1 aspect ratio screen without the black bars. This is achieved by re-sizing the image to fill the screen. In this way the projector is able to deliver the real theatrical aspect ratio.
(117Kb) SIM2-Perfect-Fit.pdf 10.09.2015

Software & Technical material

Description: SFUNI - System Flex Universal
SFUNI - System Flex Universal
TECHNICAL DOCUMENT: this guide show the three possible methods of mounting the anamorphic lens on the SFUNI bracket.
(254Kb) SFUNI - System Flex.pdf 10.09.2015
Description: Live Colors Calibration software 3.8
Live Colors Calibration software 3.8
The advanced Live Colors Calibration software, enables complete adjustment of the primary, secondary and white point color coordinates of the projector.
(22859Kb) LCC2_ver3.8_Feb24th2016.zip 06.06.2016