DLP Projectors: 20th Line: LUMIS 20th

Overview:

  • SIM2 20th anniversary special series
  • Designed for use with mid/large screen sizes (up to 4m - 13ft wide).
  • High quality images from any and all video devices and in a variety of room lighting levels

Product Detail:

The Grand Cinema™ LUMIS 20th projector has been specifically designed to offer exceptional performance, ease-of-use and room-friendly aesthetics.

SIM2’s ALPHAPATH™ light engine, partnered with 0.95” 1080p DarkChip4 DLP® chipsets from Texas Instruments, enables the Grand Cinema™ LUMIS 20th projector to achieve an excellent contrast ratio of 10,000:1 and an impressive brightness level of 3000 ANSI lumens, thank to its new 280W lamp.

SIM2’s Grand Cinema™ LUMIS 20th sports PureMovie, PureAction, and PureAction 3D user modes and SIM2’s advanced Live Colors Calibration 2 software.

Technical Specs:

LIGHT ENGINE

DLP® Type 3 Chip DMDs 0,95” 1080p DC4
Resolution 1920x1080 pixels
Lens High quality, high resolution improved optics with motorized zoom and focus adj.
Special features Puremotion 3D technology
Puremotion 2D for fast action materials
Puremovie 2D
Contrast ratio (Full ON/ Full OFF) >10,000:1
Lamp power consumption 280W, dimmable to 230W
Brightness(1) up to 3000 Ansi Lumens (in 2D mode)
Lamp life expectancy(2) 2000 hours typical in standard power mode; 3000 hours in ECO mode

INSTALLATION

Throw ratio standard lens 1.82-2.48:1 (type T2)
Throw ratio optional lenses 1.37-1.66:1 (typ. T1)
2.6-3.9:1 (typ. T3)
Optical shift Vertical up to +50%, down -10% max. from screen center (based on image height)
Digital keystone adjustment +/-18˚
Picture size (inches diagonal) 50-300
Aspect ratio 4:3, 16:9 Anamorphic, LetterBox, Panoramic, Pixel to Pixel + 3 custom-user adjustments

ELECTRONICS

Horizontal & vertical scan freq. 15-80kHz/24-120Hz
SDTV PAL (B,G,H,I,M,N,60); SECAM; NTSC autom. selected
HDTV 480p, 720p 50/60, 1080i 50/60, 1080p 24/50/60 + 576p
PC graphic standard VGA, SVGA, XGA, SXGA, UXGA, WUXGA 10 bit Full Channel Signal Board Video Processing

INPUTS/OUTPUTS

Digital 2 x HDMI-HDCP (HDMI)
Analog 1 x Composite Video (RCA)
1 x S-Video (Mini DIN 4pin)
1 x Graphic RGBVH (VGA-UXGA) (D-sub 15 pin)
1 x Component - Analog YPbPr/RGBs/RGBHV (RCA)
Control 1 x RS232 (D-sub 9 pin)
1 x USB
Miscellaneous

GENERAL SPECIFICATIONS

Software control upgradable via RS232, serial interface or USB
Mains voltage range 100-240 +/-10% (48/62 Hz)
Projector Weight 11 Kg. or 24.3 lbs

ACCESSORIES

Supplied SIM2 Visus System including 4 pair of active 3D glasses
Installation and User Manual
AC power cords (2m - 6.6 ft)
Backlit remote control and batteries
Live Colors Calibration software
Optional Projector ceiling bracket (cod. LUMISBRKT)
Anamorphic lens systems (fixed or motorized)

CABINET COLORS

Standard Soft-touh Matte Black
(1) ANSI Lumen Specification: This is the typical projector brightness specification found in most sales literature. This measurement allows for direct comparison with other manufacturer’s projectors. Measurements are taken in a totally dark test room with T3 type lens (wide angle zoom settings), brand new lamp at full power, lamp’s native white color temperature, internal test pattern (full white) and in compliance with ANSI IT7.228-1997 specification.
(2) Lamp life: the hours quoted have been measured in a lab under ideal test conditions. Lamp life varies depending on usage conditions and the surrounding environment. This is an average value that cannot be guaranteed and is not protected by warranty.
The DLP® logo and DLP® medallion are trademarks of Texas Instruments.
Due to constant product development, specifications are subject to change without notice.