DLP Projectors: NERO Line: NERO 20th

Overview:

  • Medium/large home theaters, media rooms and family/games room with moderate ambient light.
  • PureLED Technology - 1,200 lumens light output (the equivalent of 1,800 lumens of lamp-based projectors)
  • Long-life, high efficiency LEDs: 20,000 hours or years of silent uncompromised 2D/3D viewing

Product Detail:

NERO 20th is a lifestyle product designed for today’s lifestyle. LED is the source of illumination (LED lifetime around 20,000 hours), DLP the image technology. This combination ensures that images are bright, sharp and beautifully realistic. With a specification list that reads: 1,200 lumens of light output (the equivalet of 1,800 lumens on lamp-based projectors), a 30,000:1 contrast ratio and a color gamut 135% that of the NTSC TV standard, this is an impressive projector. Connecting your favorite video sources is simple; thanks to the wide choice of inputs that includes two HDMI 1.4 sockets. Easily integrated into any interior design and delivering SIM2-quality picture performance, NERO 20th will enhance your home entertainment experience.

Technical Specs:

LIGHT ENGINE

Technology 1 x chip DMD
Resolution Full HD 1920 x 1080 pixels
Lighting system PureLED technology
3D(*) Features
SIM2 DynamicBlack™ Technology enhanced solution (digital)
Contrast ratio (Full ON/OFF) >30,000:1 with DynamicBlack™
Brightness 1200 lumens (the equivalent of 1,800 lumens(**) of lamp-based projectors)
Expected LED lifetime 20,000 hours

INSTALLATION

Lens option (throw ratio) 1.51-2.88:1
Motorized Lens shift V +/-60% /, H +/-10%
Digital keystone adjustment Vertical
Picture size (inches diagonal) 65-200
Aspect ratio 4:3, 16:9 Anamorphic, LetterBox, panoramic, pixel to pixel + 3 custom-user adjustments

ELECTRONICS

Horiz. & vertical scan frequency 15-80kHz/48-144Hz;
Color System PAL (B,G,H,I,M,N,60); SECAM; NTSC 3.58; NTSC 4.43
PC graphic standards VGA, SVGA, XGA,SXGA, UXGA, WUXGA
SDTV 480i/p, 576i/p;
HDTV 720p 50/60, 1080i 50/60, 1080p 24/50/60 + 576p

INPUTS/OUTPUTS

Analog 1 x Component - YCbCr/RGBs (RCA)
1 x Graphic RGBHV/YCrCb (1x D-Sub 15 pin)
1x S-Video
Digital 2 x HDMI (v.1.4 with Deep Color)
Control 1 x RS-232
1 x USB (B type socket)
1 x USB (Service only)
Miscellaneous 3D Sync Out
1x 12V 100mA output
1x Video OUT (monitor)

GENERAL SPECIFICATIONS

Software control upgradable via RS-232 serial interface or USB
Power supply 100-240 VAC +/-10% (48/62 Hz)
Projector weight 12 Kg. / 26.5 lbs
Projector dimensions (WxHxD) 365x149x441 mm (14.4”x5.9”x17.4”)

ACCESSORIES

Supplied Installation and user manual
AC power cords
Backlit remote control and batteries
Optional SIM2 VISUS Active glasses, Emitter (optional)(*)
SIM2 VISUS Active glasses (additional pairs)
SIM2 Universal Ceiling Bracket
(*) A SIM2 3D emitter and glasses pack is required to initiate this feature (sold separately).
(**) Takes into account Helmholtz-Kohlrausch effect where brightness rises with color saturation. LED projectors produce richer and more saturated colors, thus appearing brighter than a lamp-based display with similar measured lumen specifications.
(1) ANSI Lumen Specification: This is the typical projector brightness specification found in most sales literature. This measurement allows for direct comparison with other manufacturer’s projectors. Measurements are taken in compliance with ANSI IT7.228-1997 specification.
Due to constant product development, specifications are subject to change without notice.